News Item: Airgas Valve Alert

Safety Alert- Airgas Valves

There are currently two types of valves in service for Airgas argon UHP cylinders and other inert gas cylinders on campus. Below are images of the two valves. On the left is the standard style CGA-580 valve. On the right is the RPV (Residual Pressure Valve) style CGA-580 valve.

Standard Valve RPV Valve

The RPV style enables Airgas to easily maintain high purity of gases in the refillable cylinders. However, when the cylinders with RPV style valves are used in high flow applications, the valve can produce a high pitched noise when in service. This squeal is caused by a vibrating harmonic setup in the spring mechanism of the RPV valve due to the high flow volume. This does not impact the safety of the cylinder.

To avoid the high pitch noise, Airgas has the option to use an adapter that screws into the RPV valve so the mechanism does not vibrate. This adapter has a pin that holds the mechanism in place. It is IMPERATIVE that these adapters are NOT installed with the Standard CGA-580 valve option. The adapter will damage the valve system causing the cylinder to leak. This results in an unsafe situation and an inoperative cylinder.

Below is an image of the adapter (left) and the adapter hooked up to the RPV valve (right).

Please remind yourself:

  1. The difference between a Standard and RPV valve.

  2. That the adapter must only be used with the RPV valve.

We also recommend you review the following document: Guidance from Airgas for UIUC

If you have any questions please contact DRS at 217-333-2755.

Last updated 5/22/2026