Odor Control

How do odors spread within buildings?

Odors from chemicals can be spread through a building's ventilation system, plumbing system, common access areas such as hallways and vertical openings such as elevator shafts. (A discussion of the concepts involved on this fact sheet is found on the reverse side.)

What do I do if there is an odor in my room?

Shut the doors. DO NOT open the windows. If windows are opened, the odor may be driven into the hallway regardless of whether the door is open or shut. If you have a fume hood, make sure it is turned on to help draw the odor out of the room. In all cases, it is preferred to allow the building's exhaust system (both hoods and any ventilation system) to remove the odor. If the odor is from a spill in a location where no exhaust system exists, contact DRS at (217) 333-2755 for assistance.

What information should I gather now?

You should determine if air is supplied to your room, and if any of that air is recirculated within the building. You should also determine if your location in your building has positive or negative pressure. For assistance with these issues, contact your supervisor or facility manager.

What if the odor is from a spill of an extremely toxic substance?

  1. Leave the area. Close all of the doors and windows as you leave, if you can do so safely.

  2. If air is recirculated from your location to other parts of the building or "recapture" (see back) of air from your fume hood is a problem, it may be necessary to evacuate the building. If you think this is warranted, inform the METCAD (911) of this recommendation when you call them. Pulling the nearest fire alarm is the most efficient method of notifying persons in your facility.

  3. With a toxic release, or if anyone has been injured, call METCAD (911). The nearest city fire department will respond.

  4. Have someone meet the Fire Department outside when they arrive.

What causes odors to spread through common access areas such as hallways?

Opening windows in negative pressure locations pulls air into the room, in an attempt to equalize the room's pressure with the atmospheric pressure. Since the remainder of your building will still be at a negative pressure, the air and any odor in the room with the open window will be drawn into the hallways and other common areas and spread throughout the building.

Why do odors spread through plumbing and how can I prevent it?

Drains have vents to the outside atmosphere. Therefore the plumbing in buildings which have negative pressure as compared to outside, can serve as a port for drain or sewer gases when a sink trap has dried out or the plumbing is in disrepair. It is important to maintain plumbing integrity and to keep water in the traps to prevent entry of nuisance odors from this source. At least once per month, if a sink or floor drain is not being used, you should run water for 10-15 seconds. Contrary to old recommendations, running water for a minute or more does nothing but waste water. Don't forget to take care of ALL the drains in your location, including floor drains, cup sinks and sinks in your hoods.

Is there something I can do if I'm not going to use the drain at all?

There are two options. The preferred option would be to cap or stopper a sink drain. The second, and less desired option, is to add 50-100ml propylene glycol into the drain.

Concepts of air supply and pressure used in this bulletin: In order to determine how odors might be spread through your building, it is important to understand some basics of air handling. Unfortunately, due to the varied age of buildings on campus, there is not a universal method by which air is supplied and exhausted from buildings. Some older buildings, particularly those with radiant heat and no air conditioning, do not have forced supplied air. Modifications have been made in some of these buildings, especially in areas where there are laboratories, to supply some fresh air.

A second scenario occurs in buildings constructed during the era when supplied air was first being explored. These buildings were built to supply mostly fresh air, with some air being recirculated , as a cost saving feature. Unfortunately, buildings constructed during this era also recirculated air from laboratories. As a result, an odor from a laboratory in a building that recirculates air can carry to other parts of the building which are on the same supply system.

The final scenario occurs in buildings built in recent years. They typically have different supply schemes for different uses of space. For example, laboratories in newer buildings will use 100% fresh air, and 100% exhaust air. The office portion of the building might recirculate a percentage of the air.

An additional, though less likely, concern for any building with supplied air is the concept of "recapture." When the air exiting a fume hood duct is drawn back into the supplied air intake, it is considered "recaptured." Most buildings are designed to minimize this, but the varied weight of vapors, air temperature, and air currents can cause this phenomenon to happen.

It is also important to know how the air pressure inside your building compares to the pressure outside your building. Buildings where the rate of air being removed exceeds the rate of air being provided, will have a negative pressure compared to the atmospheric pressure. When the opposite is true, more air is being provided to the building than being removed, the building would be considered having positive pressure. Therefore, opening the doors and windows in a negative pressure building will draw air in, and doing so in a positive pressure building should draw air out.

Last updated 5/22/2026