
INCORRECT: With the non-absorbent side of the lab bench paper facing up, liquids will not be absorbed and can spill over the counter and on to personnel.

CORRECT: With the absorbent side of the lab bench paper facing up, liquids will be absorbed and the spill will be contained to a certain area.

If securing lab bench paper, be sure to use the proper tape. For example, if you are working with radioactive materials, you may use radioactive hazard tape.
Lab bench paper is used on campus to absorb liquids spilled or drained from lab equipment. The proper use of lab bench paper is necessary to maintain a safe work environment. The misuse of lab bench paper may compromise the safety of the work environment and endanger personnel.
The following incorrect practices have been observed on campus:
Setting up lab bench paper with the non-absorbent side facing up
Using lab bench paper as a substitute for routine decontamination of lab benches
Neglecting to replace lab bench paper on a routine basis, especially if it has been contaminated with hazardous materials
The following practices should be implemented when using lab bench paper:
Set up lab bench paper with the absorbent side facing up
Change lab bench paper on a routine basis
Always change lab bench paper immediately after a spill or contamination
Stabilize lab bench paper with tape if needed (radioactive hazard tape may be used if radioactive materials are present)
Lab bench paper is not a permanent lab bench cover. In addition to following the correct practices for using lab bench paper, always remember to decontaminate lab benches on a routine basis.